Important:
Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.
Back

Spray-Matic 5 SI with compressed-air connection

Article number: 11868401 / EAN: 7611034110721
Spray-Matic 5 SI with compressed-air union

Stainless steel compression sprayer, with compressed-air connection

  • Adjustable pressure control valve PR 3 P1 (1-3 bar)
  • Tank made of stainless steel, filling volume 5 litres
  • Operating pressure 6 bar
  • Chemical resistant Viton gaskets
  • Security valve
  • Separate, large filling opening
  • Hose coupling fixed on container head
  • Closing cap
  • Compressed air valve
  • Pressure gauge
  • Piston valve assembly with integrated fine filter
  • Robust piston valve assembly made of polypropylene and brass
  • CE conform
Read more

Technical data
Chemical resistanceNot suitable for formic acid, acetic acids, sodium / potassium hydroxides. In addition stainless steel units: no hydrochlonic acid, nitric acid, sulfuric acid or hydrofluoric acid, ammonia, peroxides and other corrosive media.Not suitable for mineral oil based and vegetable oils, hypochlorites, limonenes, terpenes.For use with mineral oil based and vegetable solvents and oils.
ApplicationWater
Impregnation
Mineraloil based solvent
Formwork release oil / Release agents
Disinfection
Form of applicationLiquid
Filling capacity (Volume, l)5
Max. working pressure (bar)6
Nozzle typeFanjet nozzle TPU 8002 PP
Spray patternFanjet nozzle
Nozzles materialPlastic, plastic / stainless steel
Material Device/containerStainless steel
Material FittingsPlastic / brass vni, stainless steel
Fitting connectorsscrew fitting
Stress classVery heavy duty
Length (mm)190
Width (mm)190
Height (mm)460
Weight (kg)3.5
Device typeCompression sprayer stainless steel
Special functionGaskets VitonAdjustable pressure control valve
Nozzles data
Fanjet nozzle G1/4"i, TPU 8002 PP Viton (grey)Fanjet nozzle G1/4Technical parametersSpray patternFanjet nozzle (for surfaces, lawns, plates)Pressure range15 – 363 psiFlow rate gal/minpsiDroplet size depending on pressure
Pressure (psi)152944587387102116131145
Spraying
To the nozzle
Spray tube 50 cm curved, stainless steel, with adjustable connection, G1/4“e on both sides (Accessories)Spray tube 50 cm curved, stainless steel, with adjustable connection, G1/4“e on both sides (Accessories)Technical parametersSpray patternPressure range0 – 0 psiTo the nozzle
Pump assy., stainless steel, Viton (Accessories)Pump assy., stainless steel, Viton (Accessories)Technical parametersSpray patternPressure range0 – 0 psiTo the nozzle
Pressure control valve PR 3 P1, G1/2" (14 - 44 psi) Pressure control valve PR 3 P1, G1/2Technical parametersSpray patternPressure range0 – 0 psiTo the nozzle
Videos

No videos available.

Downloads
Safety regulationsSafety regulations
Choose video or document
Post a comment

Tell us what you think about Spray-Matic 5 SI with compressed-air connection!

No comments yet